JOURNAL PUBLICATIONS

K. Danai and A. G. Ulsoy, 1986, ``A Model Based Approach for On-Line Tool Wear Estimation in Turning,'' 1986 SME Manufacturing Technology Review, pp. 49-54.

Y. Koren, A. G. Ulsoy, and K. Danai, 1986, ``Tool Wear and Breakage Detection Using a Process Model,'' Annals of the CIRP, Vol. 35, No. 1, pp. 283-288.

K. Danai and A. G. Ulsoy, 1987, ``A Dynamic State Model for On-Line Tool Wear Estimation in Turning,'' ASME J. of Eng. for Industry, Vol. 109, No. 4, pp. 396-399.

K. Danai and A. G. Ulsoy, 1987, ``An Adaptive Observer for On-Line Tool Wear Estimation in Turning -- Part I: Theory,'' Mechanical Systems and Signal Processing, Vol. 1, No. 2, 1987, pp. 211-225.

K. Danai and A. G. Ulsoy, 1987, ``An Adaptive Observer for On-Line Tool Wear Estimation in Turning -- Part II: Results,'' Mechanical Systems and Signal Processing, Vol. 1, No. 2, pp. 226-240.

Y. Koren, T. Ko, A. G. Ulsoy, and K. Danai, 1991, ``Flank Wear Estimation Under Varying Cutting Conditions,'' ASME J. of Dynamic Systems, Measurement and Control, Vol. 113, No. 2, pp. 300-307.

K. Danai and H. Chin, 1991, ``Fault Diagnosis with Process Uncertainty,'' ASME J. of Dynamic Systems, Measurement and Control, Vol. 113, No. 3, pp. 339-343.

H. Chin, and K. Danai, 1991, ``A Method of Fault Signature Extraction for Improved Diagnosis,'' ASME J. of Dynamic Systems, Measurement, and Control, Vol. 113, No. 4, pp. 634-638.

R. Nair, K. Danai, and S. Malkin, 1992, ``Turning Process Identification Through Force Transients,'' ASME J. of Eng. for Industry, Vol. 114, No. 1, pp. 1-7.

K. Danai, R. Nair, and S. Malkin, 1992, ``An Improved Model for Force Transients in Turning,'' ASME J. of Eng. for Industry, Vol. 114, No. 4, pp. 400-403.

M. Fathailal, K. Danai, and G. Barber, 1993, ``Effect of Flank Wear on the Topography of Machined Surfaces,'' Tribology Transactions, Society of Tribologists and Lubrication Engineers, Vol. 36, No. 3, pp. 693-699.

H. Chin and K. Danai, 1993, ``Improved Flagging for Pattern Classifying Diagnostic Systems,'' IEEE Trans. on Systems, Man, and Cybernetics, Vol. 23, No. 4, pp. 1101-1107.

G. Xiao, S. Malkin, and K. Danai, 1993, ``Autonomous System for Multi-Stage Cylindrical Grinding,'' ASME J. of Dynamic Systems, Measurement, and Control, Vol. 115, No. 4, pp. 667-672.

V. B. Jammu, and K. Danai, 1993, ``Unsupervised Neural Network for Tool Breakage Detection in Turning,'' Annals of the CIRP, Vol. 42, No. 1, pp. 67-70.

H. Chin, K. Danai, and D. G. Lewicki, 1993, ``Pattern Classifier for Fault Diagnosis of Helicopter Gearboxes,'' IFAC J. of Control Eng. Practice, Vol. 1, No. 5, pp. 771-778.

J. Colgan, H. Chin, K. Danai, and S. Hayashi, 1994, ``Tool Breakage Detection in Turning: A Multi-Sensor Method,'' ASME J. of Eng. for Industry, Vol. 116, No. 1, pp. 117-123.

Z. Zhu, K. Danai, and J. McCormick, 1994, ``Control Design of a High Speed Robot Arm,'' SME Trans. on Robotics Research Vol. 3, pp.13-1 to 13-14.

H. Taitel, K. Danai, and D. G. Gauthier, 1995, ``Helicopter Track and Balance with Artificial Neural Nets,'' ASME J. of Dynamic Systems, Measurement and Control, Vol. 117, No. 2, pp. 226-231.

H. Chin, K. Danai, and D. G. Lewicki, 1995, ``Fault Detection of Helicopter Gearboxes Using the Multi-Valued Influence Matrix Method,'' ASME J. of Mechanical Design, Vol. 117, No. 2, pp. 248-253.

J. Jindani, S. Malkin, and K. Danai, 1995, ``A Method of Cam Lift Smoothing,'' J. of Design and Manufacturing, Vol. 5, pp. 61-66.

R. Ivester, and K. Danai, 1996, ``Intelligent Control of Machining Under Modeling Uncertainty,'' CIRP Manufacturing Systems, Vol. 25, No. 1, pp. 73-79.

V. B. Jammu, K. Danai, and D. G. Lewicki, 1996, ``Unsupervised Pattern Classifier for Abnormality Scaling of Vibration Features for Helicopter Gearbox Diagnosis,'' Machine Vibration, Volume 5, No. 3, pp. 154-162.

R. Ivester, K. Danai, and S. Malkin, 1997, ``Cycle Time Reduction in Machining by Recursive Constraint Bounding, ASME J. of Manufacturing Science and Eng., 1997, Vol. 119, No. 2, pp. 201-207.

R. Ivester, and K. Danai, 1998, ``Tuning and Automatic Regulation of Injection Molding by the Virtual Search Method,'' ASME J. of Manufacturing Science and Eng., Vol. 120, No. 2, pp. 323-329.

V. B. Jammu, K. Danai, and D. G. Lewicki, 1998, ``Structure-Based Connectionist Network for Fault Diagnosis of Helicopter Gearboxes,'' ASME J. of Mechanical Design, March 1998, Vol. 120, No. 1, pp. 100-105.

V. B. Jammu, K. Danai, and D. G. Lewicki, 1998, ``Experimental Evaluation of a Structure-Based Connectionist Network for Fault Diagnosis of Helicopter Gearboxes,'' ASME J. of Mechanical Design, Vol. 120, No. 1, pp. 106-110.

R. Ivester, K. Danai, and D. O. Kazmer, 1998, ``Automatic Tuning of Injection Molding by the Virtual Search Method,'' J. of Injection Molding Technology, Vol. 2, No. 3, pp. 103-108.

K. Wang, D. Yang, K. Danai, and D. G. Lewicki, 1998, ``Model-Based Selection of Accelerometer Locations for Helicopter Gearbox Monitoring,'' J. of American Helicopter Society, Vol. 44, No. 4, pp. 269-275.

C. Gan and K. Danai, 1999, ``Model-Based Recurrent Neural Network for Modeling Nonlinear Dynamic Systems,'' IEEE Trans. on Systems, Man, and Cybernetics- part B: Cybernetics, Vol. 30, No. 2, pp. 344-351.

C. Gan, and K. Danai, 2001, ``Nonlinear State Estimation by Adaptive Embedded RBF Modules,'' ASME J. of Dynamic Systems, Measurement, and Control, Vol. 123, No. 1, pp. 44-48.

D. Yang, K. Danai, and S. Krishnamurty, 2001, ``Knowledge-Based Interval Modeling for Efficient Global Optimization,'' Journal of Design and Engineering Automation, Vol. 4, No. 1, pp. 67-08.

D. Yang, K. Danai, and D. Kazmer, 2001, ``A Knowledge-Based Tuning Method for Injection Molding Machines,'' ASME J. of Manufacturing Science and Engineering, Vol. 123, No. 4, pp. 682-691.

S. Dong, K. Danai, and S. Malkin, 2004, ``Continuous Optimal Infeed Control for Cylindrical Plunge Grinding - Part II: Controller Design,'' ASME J. of Manufacturing Science and Eng., Vol. 26, pp. 334-340.

S.. Wang, K. Danai, and M. Wilson, 2005, ``A Probability-Based Approach to Helicopter Track and Balance,'' J. of American Helicopter Society, Vol. 50, No. 1, January, pp. 56-64.

S. Wang, K. Danai, and M. Wilson, 2005, ``An Adaptive Method of Helicopter Track and Balance,'' ASME J. of Dynamic Systems, Measurement and Control, Vol. 127, No. 2, pp. 275-282.

S. Dong, C. E, B. Fan, K. Danai, and D. O. Kazmer, 2007, ``Process-Driven Profiling for Plastics Processing,'' ASME J. of Manufacturing Science and Engineering, Vol. 129, No. 4, pp. 802-809.

K. Danai, and J. R. McCusker, 2009, ``Parameter Estimation by Parameter Signature Isolation in the Time-Scale Domain,'' ASME J. of Dynamic Systems, Measurement and Control, Vol. 131, No. 4, 041008.

K. Danai, J. R. McCusker, T. Currier, and D. O. Kazmer, 2009, ``Validation of Dynamic Models by Image Distances in the Time-Scale Domain,'' ASME J. of Dynamic Systems, Measurement and Control, in review.

J. R.McCusker, T. Currier, K. Danai, 2009, ``Improved Parameter Estimation by Noise Compensation in the Time-Scale Domain,'' Signal Processing, in review.

J. R. McCusker and K. Danai, 2009, ``Integrating Parameter Estimation Solutions from the Time and Time-Scale Domains,'' Engineering Application of Artificial Intelligence, in review.

J. R. McCusker, M. G. McKinley, and K. Danai, 2009, ``Iterative Controller Tuning in the Time-Scale Domain,'' Control Engineering Practice, in review.

J. R. McCusker and K. Danai, 2009, ``Adaptation of Jet Engine Models by Solutions from the Time and Time-Scale Domains,'' ASME J. of Engineering for Gas Turbines and Power, in review.

CHAPTERS

Danai, K., 2001, ``Machine Tool Monitoring and Control,'' Chapter 5 of Mechanical Systems Design Handbook: Modeling, Measurement, and Control, Nwokah, O. D. I. and Hurmuzlu, Y. (Eds.), CRC Press, pp. 75-84.

Kazmer, D., and Danai, K., 2001, ``Control of Polymer Processing,'' Chapter 9 of Mechanical Systems Design Handbook: Modeling, Measurement, and Control}, Nwokah, O. D. I. and Hurmuzlu, Y. (Eds.), CRC Press, pp. 139-150.

Gan, C., and Danai, K., 2001, ``Model-Based Recurrent Neural Network for Fault Diagnosis of Nonlinear Dynamic Systems,'' Chapter 10 in Radial Basis Function Networks 2, Howlett, R. J., and Jain, L. C., (Eds.) Physica-Verlag (a Springer-Verlag company).

Danai, K., 2005, ``Fault Diagnosis of Helicopter Gearboxes,'' C. de Silva (Ed.), Chapter 25 in Vibration and Shock Handbook, CRC Press.

Danai, K., 2005, ``Helicopter Rotor Tuning,'' C. de Silva (Ed.), Chapter 24 in Vibration and Shock Handbook, CRC Press.

EDITED VOLUMES

Automation of Manufacturing Processes, K. Danai and S. Malkin (Eds.), ASME, 1990, Vol. DSC-22.

Control of Manufacturing Processes, K. Danai and S. Malkin (Eds.), ASME, 1991, Vol. DSC-28.

IMECE Proc. of the Dynamic Systems and Control Division, K. Danai (Ed.), 1996, ASME.

RECENT CONFERENCE PAPERS:

"Fault Diagnosis with a Model-Based Recurrent Neural Network," Gan, C., and Danai, K., 2000, IMECE' 2000 Proc. of the ASME Dynamic Systems and Control Division, Orlando, Florida.

"Fault Diagnosis of an Internal Combustion Engine with embedded Radial Basis Function Modules," Gan, C., Danai, K., and Rizzoni, G., 2000, IMECE' 2000 Proc. of the ASME Dynamic Systems and Control Division, Orlando, Florida.

"A Knowledge-Based Tuning Method for Injection Molding Machines," Yang, D., Danai, K., and Kazmer, D., 2000, IMECE' 2000 Proc. of the ASME Dynamic Systems and Control Division, Orlando, Florida.

"Helicopter Track and Balance by Interval Modeling," Yang, D., Wang, S., and Danai, K., 2001, Proc. of the American Helicopter Society 57th Annual Forum, Washington D.C., May 9-11.

"A Forward Approach to Helicopter Track and Balance,'' Wang, S., Danai, K., 2002, IMECE 2002 Proc. of the ASME Dynamic Systems and Control Division, November 17-22, New Orleans, Louisiana, IMECE2002-33453.

"A Probability-Based Approach to Helicopter Track and Balance,'' Wang, S., Danai, K., 2003, Proc. of the American Helicopter Society 59th Annual Forum, Phoenix, Arizona, May 6-8.

''Fault Diagnosis with a Model-Based Recurrent Neural Network," Gan, C., and Danai, K., Proc. of Safeprocess 2003, Washington, D. C., June 9-11.

"Parameter Adaptation by Parameter Signature Isolation in the Time-Scale Domain,'' Danai, K., and McCusker, J. R., 2008, Proc. of 2008 Dynamic Systems and Control Conference, Oct. 20-22, Ann Arbor, Michigan.

"Mutual Identifiability Analysis for Parameter Signature Isolation in the Time-Scale Plane,'' Danai, K., McCusker, J. R., and Hollot, C. V., 2008, Proc. of 2008 Dynamic Systems and Control Conference, Oct. 20-22, Ann Arbor, Michigan.

Return to Process Automation Lab home-page